Round Head

Round Head Nozzles are particularly suitable for general cleaning applications, washing and crossing curves and corners in domestic and private sewers.
These Standard nozzles can be supplied with s/steel inserts or with ceramic inserts which are recommended when using dirty or recycled water.
The lifetime of ceramic inserts is longer than that of s/steel inserts.

Applications :

Cleaning of domestic sewers, vertical columns and pipes. Removal of oily debris, limestone, soap, grease, sanitary

Part No.DescriptionInletMaterialRear JetsFront JetØxL mm
Kg
Ø PipeMax Bar
Drilled
13110.01IRound Head Ø 131/8″FS/Steel3/6 – Drilled – 15°1 – Drilled13×170,0125 – 50250
13111.01IRound Head Ø 141/8″MS/Steel3/6 – Drilled – 35°1 – Drilled14×210,0125 – 50250
13114.01IRound Head Ø 181/4″FS/Steel3/6 – Drilled – 35°1 – Drilled18×270,0325 – 60250
13119.01IRound Head Ø 181/4″MS/Steel3/6 – Drilled – 35°1 – Drilled18×310,0325 – 60250
13122.01FTIRound Head Ø 203/8″FS/Steel3/6 – Drilled – 35°1 – M6x623×350,0440 – 80250
13123.01FTIRound Head Ø 203/8″MS/Steel3/6 – Drilled – 35°1 – M6x620×340,0440 – 80250
13125.01FTIRound Head Ø 281/2″FS/Steel6 – Drilled – 35°1 – M6x828×420,0850 – 100250
13126.01FTIRound Head Ø 281/2″MS/Steel6 – Drilled – 35°1 – M6x828×530,1650 – 100250
13127.01FTRound Head Ø 323/4″FSteel & S/Steel6 – Drilled – 35°1 – M6x832×620,2560 – 130250
13128.01FTRound Head Ø 451″ FSteel & S/Steel6 – Drilled – 35°1 – M6x845×660,3880 – 200250
write I (Inox) after part n for s/steel
SS Inserts
13125.01AIRound Head Ø 281/2″FS/Steel6 M6x8 – 35°1 – M6x828×420,0850 – 100250
13126.01ARound Head Ø 281/2″ MSteel & S/Steel6 M6x8 – 35°1 – M6x828×530,1650 – 100250
13127.01ARound Head Ø 323/4″ FSteel & S/Steel6 M6x8 – 35°1 – M6x832×620,2560 – 130250
13128.01ARound Head Ø 451″FSteel & S/Steel6 M6x8 – 35°1 – M6x845×660,3880 – 200250
13129.01ARound Head Ø 601″ FSteel & S/Steel8 M6x8 – 35°1 – M6x860×1051,30100 – 250250
13140.01ARound Head Ø 601″ 1/4″ FSteel & S/Steel8 M6x8 – 35°1 – M6x860×1051,30100 – 250250
write I (Inox) after part n for s/steel
Ceramic Inserts
13125.01CIRound Head Ø 281/2″FS/Steel6 M6x8 – 35°1 – M6x828×420,0850 – 100250
13126.01CRound Head Ø 281/2″ MSteel & S/Steel6 M6x8 – 35°1 – M6x828×530,1650 – 100250
13127.01CRound Head Ø 323/4″ FSteel & S/Steel6 M6x8 – 35°1 – M6x832×620,2560 – 130250
13128.01CRound Head Ø 451″FSteel & S/Steel6 M6x8 – 35°1 – M6x845×660,3880 – 200250
13129.01CRound Head Ø 601″FSteel & S/Steel8 M6x8 – 35°1 – M6x860×1051,30100 – 250250
13140.01CRound Head Ø 601″ 1/4″ FSteel & S/Steel8 M6x8 – 35°1 – M6x860×1051,30100 – 250250
write I (Inox) after part n for s/steel

Drilled 1/8"F -15°

Drilled

S/Steel or Ceramic Inserts