Conical Head

Conical head nozzles are particularly suitable for general cleaning uses, for washing and breaking forward bends and corners in domestic and private sewers.
These standard nozzles can be supplied with s/steel inserts or ceramic inserts which are recommended when using dirty or recycled water.
Ceramic inserts lifetime is longer than s/steel one’s.

Applications :

Cleaning of domestic sewers, vertical columns and pipes, removal of oily debris, limestone, soap, grease, sanitary.

Part No.DescriptionInletMaterialRear JetsFront JetØxL mm
Kg
Ø PipeMax Bar
Drilled
13130.01IConical Head Ø 131/8″FS/Steel3/6 – Drilled – 15°1 – Drilled13×170,0125 – 50250
13131.01IConical Head Ø 141/8″MS/Steel3/6 – Drilled – 35°1 – Drilled14×210,0125 – 50250
13134.01IConical Head Ø 181/4″FS/Steel3/6 – Drilled – 35°1 – Drilled18×270,0325 – 60250
13139.01IConical Head Ø 181/4″MS/Steel3/6 – Drilled – 35°1 – Drilled18×310,0325 – 60250
13142.01IConical Head Ø 203/8″FS/Steel3/6 – Drilled – 35°1 – M6x623×350,0440 – 80250
13143.01IConical Head Ø 203/8″MS/Steel3/6 – Drilled – 35°1 – M6x620×340,0440 – 80250
13145.01FTIConical Head Ø 281/2″FS/Steel6 – Drilled – 35°1 – M6x828×420,0850 – 100250
13146.01FTConical Head Ø 281/2″MSteel & S/Steel6 – Drilled – 35°1 – M6x828×530,1650 – 100250
write I (Inox) after part n for s/steel
SS Inserts
13145.01AIConical Head Ø 281/2″FS/Steel6 M6x8 – 35°1 – M6x828×420,0850 – 100250
13146.01AConical Head Ø 281/2″ MSteel & S/Steel6 M6x8 – 35°1 – M6x828×530,1650 – 100250
13147.01AConical Head Ø 323/4″ FSteel & S/Steel6 M6x8 – 35°1 – M6x832×620,2560 – 130250
13148.01AConical Head Ø 451″FSteel & S/Steel6 M6x8 – 35°1 – M6x845×660,3880 – 200250
write I (Inox) after part n for s/steel
Ceramic Inserts
13145.01CIConical Head Ø 281/2″FS/Steel6 M6x8 – 35°1 – M6x828×420,0850 – 100250
13146.01CConical Head Ø 281/2″MSteel & S/Steel6 M6x8 – 35°1 – M6x828×530,1650 – 100250
13147.01CConical Head Ø 323/4″FSteel & S/Steel6 M6x8 – 35°1 – M6x832×620,2560 – 130250
13148.01CConical Head Ø 451″FSteel & S/Steel6 M6x8 – 35°1 – M6x845×660,3880 – 200250
write I (Inox) after part n for s/steel

Drilled

S/steel & Ceramic Inserts